Page is not available.
Make sure your browser allows JavaScript execution.

Please wait for page to completely download

Shopping Cart

Order fast

Series R608

Here you can configure your Energy Chain System® individually. All entries will be copied to the Bill of Materials shown at the bottom of this page.

Series R608, energy tube

1. Crossbars on Energy Chains® are removable along both radii
2. Hinged snap-open removable lids along the outer radius
3. Stop dog with brake for noise reduction
4. Wide, rounded crossbars
5. Optimized glide pads with lateral wear allowance
6. Numerous interior separation possibilities
7. Closed and open styles can be combined
8. Dirt-repellent exterior
9. Energy Chains® also available with reverse bending radius “RBR”

Inner widths Bi: 7.87 up to 19.69 (200 - 500 mm)
Bending radii R: 9.84 up to 39.37 (250 - 1000 mm)
Pitch: 5.63 (143 mm) per link = 3 links/ft (7/m)

When to use Series R608

When quiet operation is required
When very high speeds and/or accelerations are required
For long travels
For high fill weights

When not to use Series R608

When a simpler, low-cost solution is required
Series 1640
If an increased inner height is required
Series 640

Installation dimensions


Part No. :
Inner width Bi [inch]:
Bending radius R [inch]:
Travel distance S [ft]:
Fixed end dM [ft]:
Chain length^** [ft]:
Number of chain links :
External width Ba [inch]:
H^* [inch]:
D [inch]:
K [inch]:
H2 [inch]:
D2 :
K2 [inch]:
Hi [inch]:
Ha [inch]:
Weight per link [oz.]:
Weight [lbs/ft]:
* The required installation clearance is HF = H + 3.94 (100 mm) (in the case of 3.36 lbs/ft (5 kg/m) additional load) If extremely restricted space is available, please consult us.
** The calculated length corresponds to the chain length without mounting brackets.

A=Moving End , B=Fixed End
Pitch: 5.63 (143 mm) per link
Links per ft: 3 (7/m)
Travel: S
Chain length = S/2 + K

Unsupported length

Dependency of the unsupported length on the additional load
X axis: Unsupported length in ft FLB/FLG
Y axis: Additional load in lbs/ft
Lower scale: Length of travel S in ft
FLB = unsupported with permissible sag
FLG = unsupported with straight upper run

Price index:

Opening mechanism :

Personal contact

Application examples 3D-CAD Samples and catalog order E-Chain® Expert call Service life calculation PDF file Ask the product expert

Designing with igus®

Quiet design

Steel mounting brackets

Diverse possibilities of interior separation

5 widths and 10 bending radii

Design specificationFurther information on "unsupported application"

Design specificationFurther information on "gliding application"

Assembly instructions

Other installation types

Technical specifications

Strain reliefs

Interior separation

Option 1: Vertical separators and spacers

Option 2: Shelves

Product range


unassembled	assembled
Per . chain link

Please use Configurator for partitioning of interior and for filling with cables.

Call configurator


Part No. :

Pc. Add to part list

Online Services:

Option 1: Vertical separators and spacers

Vertical separators are used if a vertical subdivision of the Energy Chain® interior is required. By standard, vertical separators are assembled every other Energy Chain® link. NOTE: Observe a lateral spacing of at least 1.26 in. (32mm) for Energy Tubes and .63 in. (16mm) for Energy Chain®. There is no minimum spacing needed for side plates Exception: Minimum spacing Locking separator 6008 = .91” (23 mm)

Standard separator 6001 for Energy Chains® and Energy Tubes
This separator offers safe stability due to its wide base design, also when used with thick cables or hoses.

Locking separator 6008 for Energy Chains®
This separator features increased retention force for applications exposed to very high humidity and extreme loads. The extra retention force is achieved by asymmetric claws for the crossbar. Take care to ensure proper alignment.

NOTE ON SPACERS
Vertical separators are adjustable, but can be fixed in position by means of a spacer. Spacers are most often necessary for side mounted applications. The available inner height is reduced by .08” (2mm) per spacer (for example if one spacer is placed on either side of the separator, the overall inner height is reduced by .16” (4mm). To avoid this, place the spacers on the outside of the opening crossbar (not for long travels).

Product range


unassembled	assembled
Per . chain link

Please use Configurator for partitioning of interior and for filling with cables.

Call configurator


Part No. :

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:


Width [inch]:
Part No. :

Pc. Add to part list

Online Services:

Option 2: Shelves

Energy Chains® and Energy Tubes can be subdivided both vertically and horizontally using the various interior separation elements.

Side plates 6002
This component is used to form the basic pattern of a shelf system.

Vertical separator 6003
This component is used to form the basic pattern of a shelf system.

Locking vertical separator 6010
This separator is slotted and able to be combined with shelves

Slotted separators 6004
These are used for very complex subdivisions. However, they cannot be retrofitted into an existing separation system without removing the shelves first.

Slotted separator 6005
This separator can be retrofitted into an existing interior separation system without removing the shelves, as long as these shelves fit into any of the 11 middle slots

Shelves 420-XX
These components form the basic pattern of a shelf system. Shelves of various widths can be arranged at 7 different heights in .28” (7mm) increments

Mounting brackets

Steel mounting brackets

unassembled	assembled

	For pivoting connections
	One part for all chain widths
	Electrically conductive


:
Part No. :
A=B [inch]:
C [inch]:
D [inch]:
E [inch]:
F [inch]:
G [inch]:
H [inch]:
I [inch]:
K [inch]:
M [inch]:

Strain reliefs

Guide troughs

Guide troughs made of steel

1. Guide trough (blue)
2. Glide bar (black)
3. Assembly set (red)
4. Individual fastening without C-profile
5. Length of profile rail

Guide troughs are used for applications in which the upper run of the Energy Chain® glides on the lower run. The following components are required if the igus® steel guide trough is used.Guide trough without glide bars part no. 98-30, guide trough with glide bars part no. 98-31. Installation sets as a joint connection part no. 98-50. XX
.XX indicates the length of the C-profiles on which the guide trough is mounted.The standard length of the trough components and glide bars is 6.56 ft (2 m). The required total length of the guide trough is determined by the travel.


Part No. :
D [inch]:

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:

+ Easy assembly with installation sets
+ 2-part design - adaptable to chain widths
+ Very stable
+ Economical
+ Large selection

Guide trough without glide bars part no. 98-30, guide trough with glide bars part no. 98-31

Installation sets as a joint connection part no. 98-50. XX

Part List

Personal contact

GToB Imprint General notes Data protection declaration

hanging (max.) [ft]	393,7 (120 m)
standing (max.) [ft]	19,69 (6 m)
max. side-mounted, unsupported [ft]	19,69 (6 m)
max. vertical, long travels [ft]	1476,38 (450 m)

Material of chain links	igumid G
Min. permissible temperature [°F]	-40 (-40 °C)
Max. permissible temperature [°F]	248 (120 °C)
Gliding speed (max.) [fpm]	1968,5 (10 m/s)
Max. gliding speed [ft/s²]	164,04 (50 m/s²)
Speed FLG max. [fpm]	3937,01 (20 m/s)
Speed FLG max. [ft/s²]	656,17 (200 m/s²)
Speed FLB max. [fpm]	590,55 (3 m/s)
Speed FLB max. [ft/s²]	19,69 (6 m/s²)
Flammability class of chain link	VDE 0304 IIC UL94 HB

Series R608

Series R608, energy tube

Installation dimensions

Unsupported length

Long travels

Other installation types

Technical specifications

Interior separation

Product range

Product range

Mounting brackets

Guide troughs

Part List