Please choose your delivery location

The selection of the country/region page can influence various factors such as price, shipping options and product availability.
Inquiry / Contact
igus® Canada

180 Bass Pro Mills Drive

Concord

Ontario L4K 0G9

+1 (800) 965-2496
+1 905 760-8688
CA(EN)

Sleeve Bearings

Sleeve bearings made from high performance plastics provide mechanical stability with the lowest coefficients of friction without additional lubrication. Whether in dirt and dust, in the cleanroom laboratory or under water, igus® self-lubricating and maintenance-free sleeve bearings are designed for longer service life while facilitating smooth linear movement between moving parts within high-motion applications. iglide® sleeve bearings, like our many other products, have been tested rigorously within our 41,000 ft.2 test laboratory to ensure long service life. Compared to metal bearings, our sleeve bearings have better wear rates and thinner walls, both of which help eliminate the potential for inaccuracy, excessive noise, and high rates of friction. Typical metal bearings would also corrode and fail in highly corrosive or harsh environments, causing unplanned downtime; however, sleeve bearings made of iglide® material are resistant to corrosion, dirt, dust, and debris.

Categories
Filter
Application Requirements
Material
Certifications and approvals

Number of products: 56

iglide® G, sleeve bearing, mm

  • Most popular iglide® material worldwide
  • High wear resistance
  • Resistance to dust and dirt
  • Cost-effective
  • CO2 equivalent: per piece available
from 0.81 USD/Pc.
314 items, thereof ready for shipping:
292 variants within 24 hours
20 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2) CO2 equivalent
available per piece

iglide® A350, sleeve bearing, mm

  • The endurance runner at higher temperatures in the food sector
  • Compliant with EC directive 10/2011 EC
  • FDA-compliant
  • For use with temperatures up to +356 °F
  • CO2 equivalent: per piece available
from 2.74 USD/Pc.
78 items, thereof ready for shipping:
64 variants within 24 hours
14 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2) CO2 equivalent
available per piece

iglide® M250, sleeve bearing, mm

  • The tough all-around performer with excellent vibration dampening
  • Excellent vibration dampening
  • Resistant to edge loads
  • High impact resistance
  • CO2 equivalent: per piece available
from 1.07 USD/Pc.
214 items, thereof ready for shipping:
162 variants within 24 hours
50 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2) CO2 equivalent
available per piece

iglide® P210, sleeve bearing, mm

  • Specialist for pivoting, rolling applications and more - Good coefficients of friction and wear on almost every shaft
  • Low humidity absorption
  • Extremely wear resistant especially up to 2900 psi in pivoting applications
  • Versatile: performance on many different shafts
  • Good with edge loads
  • Lubrication and maintenance-free
  • Standard range from stock
  • CO2 equivalent: per piece available
from 1.12 USD/Pc.
78 items, thereof ready for shipping:
72 variants within 24 hours
6 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2) CO2 equivalent
available per piece

iglide® J, sleeve bearing, mm

  • The versatile endurance runner, highly resistant to wear on (nearly) all shafts with very low coefficients of friction
  • Low wear against different shaft materials
  • Low coefficients of friction in dry operation
  • Vibration-dampening
from 1.40 USD/Pc.
189 items, thereof ready for shipping:
177 variants within 24 hours
11 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2) CO2 equivalent
available per piece

iglide® TX1, sleeve bearing, mm

The heavy-duty bearing up to 29007 psi
  • Up to 29007 psi static and 20305 psi dynamic
  • Wear-resistant and dimensionally stable
  • Good liquid media resistance
from 17.09 USD/Pc.
38 items, thereof ready for shipping:
12 variants within 24 hours
22 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglide® T500, sleeve bearing, mm

  • The chemical and temperature specialist, up to 21755 psi static
  • Temperature resistant from -212 °F to +482 °F in continuous operation
  • Universal resistance to chemicals
  • High compressive strength
  • CO2 equivalent: per piece available
from 3.67 USD/Pc.
135 items, thereof ready for shipping:
95 variants within 24 hours
6 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2) CO2 equivalent
available per piece

iglide® P, sleeve bearing, mm

  • The cost-effective outdoor all-around performer - No moisture expansion even with high ambient humidity
  • Low water absorption
  • Low wear rates
  • High load capacity
  • CO2 equivalent: per piece available
from 1.00 USD/Pc.
125 items, thereof ready for shipping:
76 variants within 24 hours
46 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2) CO2 equivalent
available per piece

iglide® J260, sleeve bearing, mm

  • Ideal for plastic shafts
  • Very good c. o. f. for low or medium loads
  • Good liquid media resistance
  • Slightly higher temperature rating than iglide® J
from 2.11 USD/Pc.
11 items, thereof ready for shipping:
9 variants within 24 hours
2 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglide® J3, sleeve bearing, mm

  • The new endurance runner: specialist for pulsating loads
  • Low coefficients of friction
  • Good liquid media resistance
  • Low humidity absorption
  • CO2 equivalent: per piece available
from 1.36 USD/Pc.
83 items, thereof ready for shipping:
50 variants within 24 hours
33 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2) CO2 equivalent
available per piece

iglide® J350, sleeve bearing, mm

  • Endurance runner with high dimensional stability at high temperature - Can be used with many kind of shafts and loads
  • Excellent coefficient of friction against steel
  • Continuous service temperature up to +356°F
  • For medium and high loads
  • CO2 equivalent: per piece available
from 1.74 USD/Pc.
80 items, thereof ready for shipping:
53 variants within 24 hours
27 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2) CO2 equivalent
available per piece

iglide® L250, sleeve bearing, mm

  • For high speeds
  • Specially made for fast rotating applications
  • Very low coefficients of friction
  • Excellent wear resistance
from 4.70 USD/Pc.
6 items, thereof ready for shipping:
4 variants within 24 hours
2 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglide® R, sleeve bearing, mm

  • Low-cost material, low wear
  • Good abrasion resistance
  • Low coefficients of friction in dry operation
  • Cost-effective
from 1.00 USD/Pc.
24 items, thereof ready for shipping:
20 variants within 24 hours
4 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglide® W300, sleeve bearing, mm

  • The classic endurance runner, very wear resistant on (virtually) all shafts
  • For especially long service life
  • Low coefficient of friction
  • Extremely high wear resistance
  • CO2 equivalent: per piece available
from 1.56 USD/Pc.
168 items, thereof ready for shipping:
133 variants within 24 hours
18 variants within 12 working days
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2) CO2 equivalent
available per piece

iglide® D, sleeve bearing, mm

  • Low-cost material with silicone
  • Low coefficients of friction at high speeds
  • For low loads
  • Cost-effective
Upon request
Shop now
RoHS compliant
According to 2011/65/EU (RoHS 2)

The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH