Please choose your delivery location

The selection of the country/region page can influence various factors such as price, shipping options and product availability.

myigus

Shopping Cart

(0)

Inquiry / Contact

igus® Canada

180 Bass Pro Mills Drive

Concord

Ontario L4K 0G9

+1 (800) 965-2496

+1 905 760-8688

Contact an expert

Request a quote

CA(EN)

Hydrostatic Bearings for Hydraulic and Pneumatic Systems

Valve technology

Each shut-off valve consists of an actuator and an actuator element (= valve). Their high chemical resistance and freedom from maintenance ensure our products are ideal for the use in valve technology.

Pump technology

Whether coolant pump in the car or washing water pump in the dishwasher: iglidur plain bearings are resistant to chemicals and withstand high sliding speeds of up to 6,500rpm when used in the medium.

Meter systems

There are meters for water and gas in every household. igus components such as gears, plain bearings or coupling rods can be installed. With special materials, including for underwater use, we find solutions for every application.

Consumers/components

Whether gas spring, hydraulic or pneumatic cylinder: with iglidur guide rings and plain bearings, low-clearance piston guides can be achieved under almost all conditions.

Valve technology - actuator

Valve

Chemical-resistant plain bearings and guide rings e. g. made of iglidur H370 for vertical piston guide
Patented lead screw geometry and temperature-resistant lead screw nut e. g. made of iglidur J350 for vertical drive of the shut-off body

Slider

Dirt-resistant plain bearing and guide rings e. g. made of iglidur G for vertical piston guide
Patented lead screw geometry and chemical-resistant lead screw nut made of e. g. iglidur J350 for vertical drive of the shut-off body

Tap

Food-compatible plain bearings or sliding plates e. g. made of iglidur A350 for rotary motion of the ball valve
Special sliding ring and thrust washer for guiding and sealing the ball

Shut-off/throttle damper

iglidur Q plain bearing for high dynamic loads in the pivot points of the flaps
Optimised for pivoting movements of the flap

Valve technology - actuator

Linear drive

Lubrication-free plain bearings e. g. made of iglidur G for shaft bearings
Noise dampening plastic gears e. g. made of iguform S270 for transmission in the gearbox
Lead screw and lead screw nut for vertical movement also possible in special shapes

Rotary drive

Lubrication-free plain bearings e. g. made of iglidur G for shaft bearings
Noise dampening plastic gears e. g. made of iguform S270 for transmission in the gearbox
Lead screw and lead screw nut for vertical movement also possible in special shapes

Pump technology

Wet running pumps

Media-resistant plain bearings e. g. made of iglidur H3 for the bearing of the drive shaft
Rotation in a medium (water, oil, etc.) makes revolutions of up to 6,500 rpm possible

Vertical pump

Sewage-resistant plain bearings e. g. made of iglidur UW for the bearing of the drive shaft
Short-term high speed of up to 2m/s possible in unlubricated condition

Roller pumps

Media-resistant knife edge rollers e. g. made of iglidur H1 for rotation
xiros guide rollers with very low break-away torque for rolling motion

Meter systems

Water meters

With a plain bearing made of iglidur UW160, the bucket wheel "floats" on the bearing point. Minimal friction, as UW160 has the same density as water.
xiros ball bearing with glass balls for smooth-running, corrosion-free bearing of the impeller wheel
Cost-effective production of the entire bucket wheel by injection moulding
Low-wear plastic gears and plain bearing in the gearbox

Gas meter

Lubrication-free plain bearings e. g. made of iglidur G in the pump mechanism of the counter
Customised coupling joints for the transmission of forces in the gearbox
Low-wear plastic gears in transmission

Consumers/components

Hydraulic cylinder

Heavy-duty and oil-resistant guide rings or plain bearings e. g. made of iglidur Q for guiding the piston
iglidur SG03"] plain bearings sealed against dirt [Link url="/product/20455" title=" in the pivot point of the cylinders
igubal spherical ball with spherical compensation as lubrication-free insert in cylinder pivot point

Pneumatic cylinder

Wear-optimised plain bearings and guide rings e. g. made of iglidur G for guiding the piston
drylin R shafts made of aluminium, steel or stainless steel can be used as pistons
igubal KBRM rod ends can be combined with the shaft to achieve spherical compensation at the connection