iglide® J260 | Ideal for plastic shafts - Very good c. o. f. for low or medium loads
- Good liquid media resistance
- Slightly higher temperature rating than iglide® J
- Long life time – even on polymer shafts and other special cases
- Lubrication and maintenance-free
- Standard range from stock
Time and again the iglide® J260 material proves its worth where the maximum service life and best friction coefficients are required under special application conditions - particularly in connection with plastic shafts! Similar to the classic, iglide® J, iglide® J260 is an endurance runner with outstanding wear behavior, but provides increased reserves at its long-term application temperature of +248°F.
Typical application areasVending machinesMachine toolsRobotics[Link id="26"]
You will find plenty of additional application areas at our
Industry solutions When to use it?- When polymer shafts are used
- When the temperature rating of iglide® J is not sufficient
- If a bearing with a good coefficient of friction is required
- If high wear resistance is required at medium loads
- If good liquid media resistance is required
| When not to use?- When high surface pressures occur
- If temperatures are higher than +248 °F
- When maximum universal wear resistance possible is required
Use our filter options to find the most suitable product |
Tolerances and measurement systemThe installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods Assemblyiglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglide® - assembling, gluing, machining
Certificates and standards