igutex® TX3 | Fiber composite plain bearings for high load applications


Typical applications

Agriculture equipment
Construction machinery
Heavy machinery / plant construction

Here you can find further applications:
Industry solutions

 

When do I need it? If very high static loads occur permanently For heavy duty swivel applications When temperature resistance and media resistance are required in addition to very high load capacity

When do I not need it? When loads below 100 MPa occur iglide® G300, sleeve bearing, mm iglide® Q2, sleeve bearing, mm iglide® Q, sleeve bearing, mm For rotary motion in continuous operation iglide® L280, sleeve bearing, mm iglide® Z, sleeve bearing, mm iglide® G300, sleeve bearing, mm For high temperature, medium load applications iglide® T500, sleeve bearing, mm iglide® J350, sleeve bearing, mm

Use our filter options to find the most suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the igutex® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods

Assembly
igutex® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing hole. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are thus reliably avoided.
iglide® - assembling, gluing, machining