iglide® Q290 | for moderate to high loads, especially on soft shafts
 

• Long life especially on soft shafts
• Continuous use up to +284 °F
• Resistant to edge loads
• Lubrication- and maintenance-free

iglide® Q290 shows outstanding service life in robust swivel applications, as they are frequently found in some agricultural machinery, especially on "soft" shafts (e.g. galvanised). The wear on the shafts is minimal.
 
Typical application areas
 
Agriculture equipment
Construction machinery
 
You can find further applications here:
Industry solutions
 
 

When to use it? If a long-lasting bearing is needed for rugged operating conditions (agricultural equipment, construction machinery, etc.) with moderate to high dynamic loads on "soft" shafts.

When not to use? When permanently high static loads higher than 7977 psi occur. iglide® G300, sleeve bearing, mm iglide® Q2, sleeve bearing, mm iglide® Q, sleeve bearing, mm If an extremely wear-resistant bearing is needed on "soft" shafts for minor loads. iglide® J, sleeve bearing, mm iglide® J3, sleeve bearing, mm When temperatures are continuously higher than +284 °F. iglide® J350, sleeve bearing, mm iglide® Z, sleeve bearing, mm

Use our filter options to find the most suitable product
 
Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods
 
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglide® - assembling, gluing, machining