Cable carrier catalog: browse our entire selection below!

Miniature cable carriers for confined installation spaces

E2 micro

For restricted spaces

Small pitch, quiet operation. Lightweight with cable-friendly interior.

E2 micro - overview

E2 mini

Interior separation available

Small pitch, quiet operation. Optimized weight/stability ratio. Several different interior separation options available.

E2 mini - overview

E2/000

Two-piece energy chain -
The E2 standard

Standard e-chain®, medium sizes, 21 to 45 mm inner heights. Snap-open along two sides, lightning fast installation. Many-sided modular interior separations

E2/000

Low-cost and quick-fill cable carriers

E-Z Chain®

Easy insertion of cables

Flexible opening to allow cables and hoses to be quickly and easily installed or retrofitted.

E-Z Chain® - overview

E1 System

energy chain in one strip

Modular, one-piece band for simple applications. Cost-effective solution for large numbers.

E1 system - overview

Zipper chain

Un-zip to open

Open and close at lightening speed using the special design "Zipper".

Zipper - overview

SnapChain

Cost-effective and easy-to-fill e-chain®

Quickly mount cable packets in bundles. Low-priced alternative to complex cable shears.

Overview SnapChain

Energy Tubes to protect cables from chips, dirt, and debris

E2 R100

Energy Tubes

Lids snap open on one side and on the inner or outer radius. Many different interior separator options available.

E2 R100 - overview

E2 R

Energy Tubes

Removable lids. Many different interior separation options available.

E2 R - overview

R2-1

e-tubes - low cost chip protection

Lids snap open along outer radius from both sides.

Overview R2-1 tubes

RX tubes

Most chip-resistant design

Smooth, rounded contours, plenty of interior space. Reverse bend radius (RBR) available.

RX tubes overview

The standard cable carrier for almost every application

E4-1

All the benefits of the entire E4 range

With igus® E4-1 cable carriers, the service life of your application can be increased and costs significantly reduced.

E4-1 overview

E4-1L

Highly dynamic energy chain

High stability and easy access due to snap-open crossbars. Inner heights 38 to 48 mm. Low weight facilitates higher dynamics

Overview E4-1L

E4/100

Lowest noise in its class

Open and enclosed versions can be snapped open along both the inner and outer radius. Wide range of accessories available.

E4/100 - overview

E4/4

Long & side-mounted travels

Open and enclosed versions snap open on both sides. Suitable for unsupported, side-mounted applications and long travels.

E4/4 - overview

E4/light

Lightweight

Smaller side links and thinner crossbars. Cost effective design. Offers a large interior space for multiple cables and hoses.

E4/light - overview

Low noise, low-abrasion, vibration-free energy chains

T3 System

Highly flexible, low-vibration energy chain "on strip"

Extremely low noise operation up to 33 dB(A). Inner height 29mm, low-vibration, very light. For highly dynamic applications; suitable for clean-rooms.

T3 System overview

E3 system

Extremely low-noise, for the smallest installation spaces

Extremely low noise operation up to 38 dB(A). Inner heights from 10 to 15 mm. Low-vibration, wear-resistant. For highly dynamic applications; suitable for clean-rooms.

E3 system - overview

System E6

Low noise

Extremely low noise operation down to just 37 dB(A). Minimal vibrations. High speeds and accelerations possible. Also available as an Energy Tube.

System E6 - overview

E6-1 System

Light version

Series E6-1 combines all benefits of Series E6, such as its ruggedness and cleanroom-compatibility, at lower weight and even quieter operation and higher maximum speeds.

E6.1 system - overview

triflex® for 3D and circular movements, especially for robotics

triflex® R

3D e-chain® especially for robotic applications

Three energy chain options: enclosed, easily fillable, or as light version. First choice for multi-axis industrial robots.

triflex® R - overview

E-Z triflex®

e-chains® for 2D and 3D movements

Closed or easily fillable. Modular system for complex movement. Chain links moving in a combination of one, two or three axes possible.

E-Z Triflex® - overview

triflex®

For 2D and 3D movements - closed

Enclosed or easily fillable. Modular system for complex movement. Chain links moving in a combination of one, two or three axes possible.

triflex® - overview

twisterchain new

For circular or spiral movements

New generation energy chains for circular movements up to 540º and more. Higher stability and more additional load possible.

Overview twisterchain new generation

twisterchain

For circular or spiral movements

energy chains for circular movements up to 540º. Quick cable replacement. Modular design - variable widths.

twisterchain - overview

twisterband

Rotary movements up to 7000º

twisterband: new sizes. Rotary movements up to 7000° and more. Compact, modular and cost-effective.

Overview twisterband

twisterband HD

Stable pin/hook connection

twisterband HD: stable pin/hook connection for high load and long service life.

twisterband HD overview

Solutions for long travels - with or without guide troughs

rol e-chain® Series

Rolls instead of gliding, energy-effiicient

Travels up to 2,700 ft and speeds up to 20 ft/s possible. Reduces required drive power to less than 25%. Can be used in harsh, dirty environments.

Overview rol e-chain®

P4 system

Roller chain profile, energy efficient

Quiet, abrasion-resistant, maintenance-free energy chain. For long travels of 1,969 ft and more, very high fill weights and speeds.

P4 system

autoglide series

Special solutions for long travels

Combination of autoglide and energy chains. E-Z Chain®, E2/000 and E4-1 systems.

Overview autoglide series

AX e-chains® series

Special e-chains® for applications in fine dust

Exterior stop dogs prevent the accumulation of dust. All existing widths can be combined.

AX e-chains® overview

Basic Flizz®

Protection against weather and dirt exposure

Cost-effective and fully enclosed complete solution, e.g. waste water treatment plants.

Basic Flizz® overview

Micro Flizz® system

Safe guidance of energy, data and air

Compact, cost-saving energy chain. Compact, complete system for the safe guidance of energy, data and air.

Overview Micro flizz®

Guidelok horizontal

Guidance system for long travel distances up to 164 ft, unsupported

Unhindered travel: metal chips cannot become stuck between the gliding surfaces of the lower and upper runs of the energy chain causing damage.

Horizontal Guidelok-System

Guidelok Slimline

Made of plastic or steel

Safe vertical guidance for e-chains® in high-speed rack feeders.

Guidelok vertical, space saving

Guidefast

Very short installation times

Guidefast guide troughs are mounted on the side. Simple installation through a small number of different components.

Guidefast guide troughs

ESD

Prevention of static charges

Snap-open energy chains with mounting brackets and interior separation in ESD version available from stock.

Overview ESD

e-spool®

Multi-energy drum

The alternative to the cable drum - cable-friendly and guides various media safely

The "igus cable drum" without slip ring

magsnap

Magnetic magsnap opening crossbars – save space run without trough.

magsnap - held by magnets

Liftband

Vertical applications up to 42.7 feet

Alternative to Zig-Zag solution - Lighter and smaller installation space.

liftband for vertical applications

FTA

Floating moving end

Compensation of parallel errors at long travels.

FTA Floating moving end

PPDS

Push Pull Force Detection System

Push/Pull force calculation as safety standard.

PPDS basic

Offshore e-chain®

Energy feed to the ocean floor

Heavy-Duty underwater energy supply.

Offshore e-chain®

RTG-extension - e-rover

Automatic coupling of e-chains®

igus® e-rover extension for E-RTGs

e-rover RTG extension

Assembly Tools

For "frequent users"

Simple tool - great benefits: assembly tools for "frequent users".

Assembly Tools

"Classic" series

And igus® special solutions

Older energy chains are also available on a continuing basis. For new constructions, we recommend the corresponding new identical e-chains®.

"Classic" series - overview

Corrugated hoses and hose guide solutions

e-skin

Innovative energy supply system

The igus® e-skin is a snap-open tube, which is composed of two parts.

e-rib

Dynamically reinforcing corrugated tubes

The reinforcement for existing corrugated tube systems - e-rib

The reinforcement for existing corrugated tube systems

PMA protective hoses

Diverse selection of tubes and accessories

For the protection of flexible, electrical cables.

PMA cable protection - product overview

Series CRC-255

The igus® CRC clearoom chain

Inner height hi: 24 mm
Inner width Bi: 38 - 103 mm
Bend radii R: 150 - 250 mm
Pitch: 27.8 mm

e-chain® Series CRC. 255

Accessories

Guide trough systems for energy chains

Long travel, gliding

From the light and all-purpose "Super-Aluminum guide trough" up to the simple and cost-effective insert trough.

Guide troughs

Rotary system

For fast rotating applications

Integrated strain relief and cable guide trough. Maximum angle of rotation 600º

The standard for circular movements

Strain relief

Secure cables and hoses

Chainfix clamps, tiewrap clamps, strain relief blocks for hoses, and quick-install clips.

Strain reliefs

chainflex®

Continuous-flex cables

Especially designed for use with cable carriers. Tested up to 30 million cycles.

chainflex® cables - product overview

e-chain® designed according to hygienic design principles

FDA-compliant and with absolutely no friction - no material rubbing against material

TH3 system

Inner height 25,5mm. Low vibration and very lightweight. For highly dynamic applications; according to hygienic design principles.

Hygienic design

e-chain® cable carrier online tools

e-chain® Product Finder

Simply enter your required dimensions and quickly find the appropriate cable carrier for your application.

Use the Product Finder

e-chain® System Configurator

The system configurator allows you to build the exact model for your needs. Select chainflex® cables to be used in the e-chain®, specific dimensions, types of movement, environment, interior separation and strain relief to create the ideal system.

Use the System Configurator

Country/Region

By selecting your country you will be shown local offers and information.

Please choose your delivery location

Cable carrier catalog: browse our entire selection below!

Miniature cable carriers for confined installation spaces

Ready to ship in 24 hours E2 micro

For restricted spaces

Ready to ship in 24 hours E2 mini

Interior separation available

Ready to ship within 2 working days E2/000

Two-piece energy chain - The E2 standard

Low-cost and quick-fill cable carriers

Ready to ship in 24 hours E-Z Chain®

Easy insertion of cables

E1 System

energy chain in one strip

Ready to ship in 24 hours Zipper chain

Un-zip to open

SnapChain

Cost-effective and easy-to-fill e-chain®

Energy Tubes to protect cables from chips, dirt, and debris

Ready to ship in 24 hours E2 R100

Energy Tubes

Ready to ship in 24 hours E2 R

Energy Tubes

R2-1

e-tubes - low cost chip protection

RX tubes

Most chip-resistant design

The standard cable carrier for almost every application

E4-1

All the benefits of the entire E4 range

E4-1L

Highly dynamic energy chain

Ready to ship within 3 working days E4/100

Lowest noise in its class

Ready to ship within 3 working days E4/4

Long & side-mounted travels

Ready to ship within 2 working days E4/light

Lightweight

Low noise, low-abrasion, vibration-free energy chains

T3 System

Highly flexible, low-vibration energy chain "on strip"

E3 system

Extremely low-noise, for the smallest installation spaces

Ready to ship within 3 working days System E6

Low noise

E6-1 System

Light version

triflex® for 3D and circular movements, especially for robotics

Ready to ship within 2 working days triflex® R

3D e-chain® especially for robotic applications

Ready to ship in 24 hours E-Z triflex®

e-chains® for 2D and 3D movements

Ready to ship within 2 working days triflex®

For 2D and 3D movements - closed

twisterchain new

For circular or spiral movements

Ready to ship within 3 working days twisterchain

For circular or spiral movements

twisterband

Rotary movements up to 7000º

twisterband HD

Stable pin/hook connection

Solutions for long travels - with or without guide troughs

rol e-chain® Series

Rolls instead of gliding, energy-effiicient

P4 system

Roller chain profile, energy efficient

Ready to ship within 5 working days autoglide series

Special solutions for long travels

AX e-chains® series

Special e-chains® for applications in fine dust

Basic Flizz®

Protection against weather and dirt exposure

Micro Flizz® system

Safe guidance of energy, data and air

Guidelok horizontal

Guidance system for long travel distances up to 164 ft, unsupported

Guidelok Slimline

Made of plastic or steel

Guidefast

E2 micro

E2 mini

E2/000

Two-piece energy chain -
The E2 standard

E-Z Chain®

Zipper chain

E2 R100

E2 R

E4/100

E4/4

E4/light

System E6

triflex® R

E-Z triflex®

triflex®

twisterchain

autoglide series

chainflex®